Drucken

Align


Anzeige pro Seite
Sortieren nach
Artikel-Nr.: HML46M01

• Continuation of Align over 25 years motor core technical knowledge and craft, based on 6S voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature.
• As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
• Even for the none 3D pilots, 460MX 6S motor utilizes less than 5 amps at hover. Not only does this require smaller C-rating packs, the lower temperature extends the battery life at the same time. Charging time basically is cut in half. These advantages makes this an ideal motor for just about everyone.
• The 460MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
• The 460MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
• Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
• Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
• Battery: 22.2V, 1100~1400mAh
• Suitable for T-REX 450 series
• Must use with:
- RCE-BL45X Brushless ESC (Governer Mode) HES45X01


Specifications
• Input voltage: 6S 22,2V
• Max continuous current: 30A/45A (5sec)
• Max output power: approx. 650W/970W (5sec)
• KV value: 1800KV
• Dimension: Shaft 3.5x29.2x38mm
• Weight: approx. 87g


• Socket button head screw (M2.5x6mm) x 2
• Washer (2.6x5.8x0.6mm) x 2
• 3mm gilt terminal x 3

CHF 58.90 *

Auf Anfrage, in der Regel 2-3 Tage

Artikel-Nr.: HML15M01T

• Use for T-REX 150


Specifications
• KV value: 8200KV
• Input voltage: 7,4V (2S)
• Stator Arms: 9
• Magnet Poles: 6
• Dimension: 1.5x13.7x21mm
• Weight: 6.5g


Content
• 1x Main Motor set
• 2x Socket Button Head Screw (#0-80x3mm)

CHF 27.50 *

Auf Lager

Artikel-Nr.: HMP70M01


• für RCM-BL700M Motor

• 700M Motorwelle x 1 (6x8x98.5mm)
• Kugellager MR688ZZ x 2

CHF 17.30 *

Auf Lager

Artikel-Nr.: HML75M03

• für T-REX 600L / T-REX 700E u.ä. Helikopter
• T-REX 600PRO verwendbar mit: 600E PRO Performance Booster H60G004XXT


Der 750MX (530KV) Motor kann mit Drehzahlreglern betrieben werden.
Starten Sie mit einer Kopfdrehzahl von 2200U/min und justieren Sie anschliessend die Einstellungen nach Ihren Bedürfnissen.


 

Technische Daten


• Eingangsspannung: 44.4V (12S LiPo)
• Strom (max.): 100A (165A 5sek)
• Leistung (max.): 4400W (7260W 5sek)
• Umdrehungen/V (KV): 530
• Stator Arme: 12
• Pole: 10
• Abmessungen: 6x52x61.5mm
• Gewicht: 452g

 

Lieferumfang


• 1x 750MX Brushless Motor
• 4x Socket screw (M4x10mm)
• 4x Distanzscheibe (4x10x1mm)
• 2x M4 Madenschraube (M4x4mm)

CHF 165.00 *

Auf Anfrage, in der Regel 2-3 Tage

Artikel-Nr.: HML47M01
English

1.Based on 6s voltage, the 470MX (1800KV) motor is tailor made for the T-Rex 470L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature.
2.As a totem to the 850MX Dominator motor, The 470MX shares the same extraordinary pedigree.
3.Even for the none 3D pilots, 470MX 6S motor utilizes less than 5 amps at hover. Not only does this require smaller C-rating packs, the lower temperature extends the battery life at the same time. Charging time basically is cut in half. These advantages makes this an ideal motor for just about everyone.
4.The 470MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
5.The 470MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
6.Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
7.Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
8.Suitable for T-REX 470L series,Must with 50A Brushless ESC(Governer Mode)(HES50X01).

CHF 73.90 *

Auf Anfrage, in der Regel 2-3 Tage

Artikel-Nr.: HML80M01
English

• To meet the power and torque requirements of enthusiasts, the high output 800MX motor was born in Aligns R&D lab. With dramatic increase in torque and power output, capable of 5100 Watts continuous power output and 11000 Watts of burst power!
• 800MX features high efficiency, superior power, excellent torque, low current draw and low temperature; its capable of maintaining consistent torque and head speed through continuous 3D maneuvers.
• Due to the 800MXs high efficiency and low current draw, the standard equipment 120A electronic speed controller are sufficient to experience the power of this motor, and extend battery longevity.
• 800MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
• The 800MX motor armature are dynamically balanced to eliminate typical imbalance found in other outrunner motors.
• Maintenance free high torque high efficiency stable, and low noise.
• High-speed ball bearings, powerful magnetic outrunner rotor.
• Suitable for T-REX 700E / 800E helicopters


800MX(520KV) motor is suitable for use with speed governor function on the speed controller.
Start with setting the governor so that head speed is at around 2200RPM, and adjust according to individual needs.
For safety reasons, please do not set too high of head speed.

Caution: When using the motor on T-REX 800E, please use 112T main gear with 12T motor pinion.
Set the head speed at 1900RPM and collective pitch at +/-12°


Specification
• Input Voltage: DC 11.1V - 50.4V
• Max Continuous Current: 115A / 250A (2sec)
• Max Output Power: 5100W / 11000W (2sec)
• KV Value: 520
• Stator Arms: 12
• Magnet Poles: 10
• Dimension: Spindle 6x56.7x93.5mm
• Weight: 508g


Accessories
• Socket screw (M4X10) x 4
• Washer (4x10x1) x 4
• 4mm gilt terminal x 3

CHF 269.00 *

Auf Anfrage, in der Regel 2-3 Tage

Artikel-Nr.: HML85M03T
Technische Daten:
- Input Voltage:12S
- Max Continuous Current: 115A/250A(2sec)
- Max Output Power:5100W/11000W(2sec)
- KV Value: 490KV
- Stator Arms: 12
- Magnet Poles: 10
- Dimension: Spindle 6x56.7x112.5mm
- Weight: 570g

 

CHF 295.90 *

Auf Anfrage, in der Regel 2-3 Tage

*

Preis , zzgl. Versand