Drucken

CastleCreations

CastleCreations


Anzeige pro Seite
Sortieren nach
Artikel-Nr.: K-09056

Beim Einsatz von 10S oder mehr benötigen die Drehzahlsteller bei modernen Akkus eine langsame Ladung der Kondensatoren vor dem Einstecken des Akkus.

Lieferumfang: Der Bausatz beinhaltet einen optimal abgestimmten Widerstand, Kabel, Stecker und Schrumpfschläuche.

CHF 8.90 *

Auf Lager

Artikel-Nr.: 010-0025-00

Neue Version!

Ein universell verwendbarer Brushless- Regler im Miniformat!

Zellenzahl mit BEC: 5-10 (2-3 LiPo)
Zellenzahl ohne BEC: 5-16 (2-5 LiPo)
Masse: 28x23x4,5mm
Gewicht: 17g
Strom: 25A Dauer/ 40A max.

Helimode
Bremse ein/aus
LiPo Mode
Timing für 2 bis 16 Pol-Motoren
usw.

Kann wahlweise über den Sender oder über das optionale PHX-Linkkabel am PC programmiert werden.

Unschlagbares Preis- Leistungsverhältnis!

CHF 75.00 *

Auf Lager

Artikel-Nr.: 010-0063-01

Zum Programmieren der CC Regler und BEC

-  Thunderbird,
-  Phoenix
-  Phoenix HV
-  Phoenix ICE
-  Phoenix ICE HV
-  CC BEC
-  CC BEC PRO

Kompatibel mit Softwareversionen seit 2007 mit Castle Link.

 

CHF 34.50 *

Auf Lager

Artikel-Nr.: 7074

Aktive Vorschaltung zum Vorladen der Eingangs-ELKO (Blitzschutz). Verhindert den Funken beim Verbinden des Reglers mit dem Akku. Schont Kontakte und Nerven.


- Vorladen bzw. Verpolen wird durch SMD-LEDs angezeigt
- Vorladestrom ist auf ca. 250mA begrenzt
- kurzschlussfest durch Übertemperatur-Schutz
- bis max. 14S LIPO (max.60V)
- nur ca. 4g, 23*15mm
- im Schrumpfschlauch
- zum Nachrüsten bereits vorhandener Steller/Regler
- für Steller/Regler aller Hersteller geeignet!

 

CHF 18.45 *

Auf Lager

Artikel-Nr.: CC-010-0005-00

Das USB Programmierkabel zu den Phönix Reglern. Über den PC lassen sich noch mehr Features wie Helimode, Bremse ein/aus/Stärke, LiPo Mode, usw. auf die persönlichen Bedürfnisse einstellen.

Neue Reglersoftware kann übers Internet direkt auf den Regler gespeichert werden!

Software für den PC findet man über den unten stehenden Link!

Systemvorraussetzung: Windows 98SE, 98ME, 2000, oder XP

CHF 29.60 *

Auf Lager

Artikel-Nr.: CC-010-0075-01




The next generation of High Voltage Brushless Speed Controls from CastleCreations

Den Akku und die Abschaltspannung erkennt der Phoenix ICE automatisch.


Daten Logger
ICE verfügt über eine Datenlogger-Funktion welche auch grosse Datensätze speichern kann.
Die Daten werden direkt im Regler gespeichert und können mit dem optionalen Castle Link USB Adapter und der kostenfreien Castle Link Software ausgelesen werden.


Technische Daten
Länge: 74.5mm
Breite: 50.6mm
Höhe: 23.2mm
Gewicht ohne Kabel: 67.8g
Gewicht mit Kabel: 120.0g
Motor Anschlusskabel: 10 AWG
Anschlusskabel länge: 12cm
Max Strom - Regler: 80 Ampere (bei ausreichender Kühlung durch Wind)
Max Spannung: 50V (12s LiPo / 36 Zellen NiCd/NiMh)

CHF 169.00 *

Auf Anfrage, in der Regel 2-3 Tage

Artikel-Nr.: CC-010-0103-00

 

With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived.
The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now.
The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an "unexpected landing", act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock.
Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility.

The Phoenix Edge series is intended for use in helicopters ranging from 450 to 800 size, and fixed wing aircraft up to 1.20 size and larger.
As always, the Edge series of controllers offer industry-leading software functions, data logging, and USB programming capability via Castle Link USB adapter.

Same Incredible Price
The Phoenix Edge controllers deliver all of this while retaining the same astonishing prices as their predecessors.


Applications
Helis: 700 Class or 800 Class
Fixed wing: giant scale

Technical Specs
Input voltage: MIN: 3S LiPo | MAX: 12S LiPo
Max continuous amperage at full throttle: 160 amps*

Size and Weight
Width: 2.0" (50.8mm)
Length: 2.8" (108.4mm)
Height: 0.9" (31.5mm)
Weight w/wires: 8.2 oz (232.8g)
Weight w/o wires: 5.3 oz (150.6g)

Miscellaneous
Programmability: Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software.
Castle Field Link Programming Card (sold separately) compatible for select functions.
Connectors: Battery and motor connectors sold separately
Tools needed for installation: Soldering iron and solder to attach bullets to motor wires and battery connector to power wires.

*RC HOBBY APPLICATION RATING: 160 amps for the duration of a single 5,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air.
Controller temperature must never exceed 100C (212F).
Exceeding current or temperature ratings may damage components and may shorten the life of the ESC.
Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC′s operating temperature.

 

 

 

CHF 365.00 *

Auf Anfrage, in der Regel 2-3 Tage

Artikel-Nr.: HES16002
English

Features
• The new Castle Edge ESC provide New Phoenix Controller AUX Line within more options as below:
a. Gain input - Allow the ESC to utilize an additional receiver channel to adjust the governor gain.
b. RPM out - Toggles the AUX Line for every electrical commutation. Divide this number by your number of magnetic pole pairs for mechanical RPM.
c. Excessive load detection - Prevent damage caused by large current spikes typically caused by too much load or possibly a short in the motor wires.
d. Audible Beacon - The controller will emit an audible locator signal from the motor when the AUX LINE is above 50% signal. The beacon is only emitted if the motor is not running
e. Log Data Reset Percentage - The users may select a percentage of the data buffer which all data is erased upon ESC boot up. This helps to ensure that the most recent flight is logged.
• Comprehensive heli feature set, including direct entry governor mode, autorotation with bailout, and soft start capabilities to protect your gearing.
• Opto isolated throttle cable helps reduce radio interference.
• Full data logging capabilities. Measure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the mystery out of electric flight.


Specifications
• Surge current: 160 Amps
• Supporting motor types: 2 poles to 10+poles in/outrunner brushless motors
• Max Supporting input voltage: 50V (12S LiPo / 36 cells NiCd/NiMH)
• Size: 111x52x30.6mm
• Weight: 224g

CHF 370.00 *

Auf Anfrage, in der Regel 2-3 Tage

Artikel-Nr.: HES08002
English

Features
• The new Castle Edge ESC provide New Phoenix Controller AUX Line within more options as below:
a. Gain input - Allow the ESC to utilize an additional receiver channel to adjust the governor gain.
b. RPM out - Toggles the AUX Line for every electrical commutation. Divide this number by your number of magnetic pole pairs for mechanical RPM.
c. Excessive load detection - Prevent damage caused by large current spikes typically caused by too much load or possibly a short in the motor wires.
d. Audible Beacon - The controller will emit an audible locator signal from the motor when the AUX LINE is above 50% signal. The beacon is only emitted if the motor is not running
e. Log Data Reset Percentage - The users may select a percentage of the data buffer which all data is erased upon ESC boot up. This helps to ensure that the most recent flight is logged.
• Comprehensive heli feature set, including direct entry governor mode, autorotation with bailout, and soft start capabilities to protect your gearing.
• Opto isolated throttle cable helps reduce radio interference.
• Full data logging capabilities. Measure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the mystery out of electric flight.


Specifications
• Surge current: 80 Amps
• Supporting motor types: 2 poles to 10+poles in/outrunner brushless motors
• Max Supporting input voltage: 50V (12S LiPo / 36 cells NiCd/NiMH)
• Size: 71x33x22.9mm
• Weight: 121g

CHF 165.00 *

Auf Anfrage, in der Regel 2-3 Tage

*

Preis , zzgl. Versand